Colorbond & Metal Roof Restoration in Tamworth & Regional NSW
Rust cut out and treated, fasteners and seals renewed, then a metal-specific etch-primed coating system sprayed to an even finish.
5 Starfrom Google ReviewsEvery rust site is treated back to sound steel and sealed, failed screws and washers are replaced, and the sheets leave under a full etch-primed two-coat system — guaranteed for 7 years.
20+ Years Experience
Licensed & Insured (230343C)
7-Year Workmanship Guarantee
Local Family Business
What 20 Years on New England Metal Roofs Teaches You
- Stewart can tell surface rust from perforation on sight — you get an honest call on repair versus sheet replacement instead of paint hiding a hole.
- Rust is mechanically cut back and converted, not painted over, so it doesn't bleed back through the topcoat in eighteen months.
- Old roofing screws and perished rubber washers are replaced across the whole roof — the single biggest source of drips on iron in frost country.
- Valleys, flashings, ridge capping and penetrations are resealed with roof-grade sealant rated for the temperature swing out here.
- Etch primer is used on bare and weathered steel so the topcoat keys chemically instead of just sitting on a slick surface.
- Heat-reflective topcoats are available in Colorbond-matched colours, which drops roof-space temperature noticeably through a Narrabri summer.
Drag the slider to see the transformation →
Our Step-by-Step Execution Process
Our Step-by-Step Metal Roof Process.
- 01
Assess the Steel
Sheet-by-sheet check for perforation, rust hot spots and failed seals.
- 02
Cut Out & Treat Rust
Rust ground back to sound steel, converted and spot-primed.
- 03
Screws & Seals
New roofing screws, rubber washers, resealed flashings and valleys.
- 04
Wash & Etch Prime
Full pressure wash, degrease, then etch primer over the whole roof.
- 05
Two-coat Spray
Two airless topcoats in your Colorbond-matched or heat-reflective colour.
Armidale Farmhouse Colorbond Recoat in Monument
A faded, chalking manor red farmhouse roof outside Armidale — solar array masked, rust hot spots cut out, screws and seals renewed, then sprayed in Monument. Drag the slider to see the transformation →
Colorbond & Metal Roof Restoration FAQs
My Colorbond is only faded, not rusty — is recoating worth it?
Faded Colorbond means the factory finish has oxidised away, which is the stage right before rust starts at the screws and cut edges. Recoating now costs far less than rust repair later, and it's the cheapest point in the roof's life to change colour.
Do you replace rusted sheets as well?
Yes. Where a sheet is perforated or the valley has rusted through, we replace it rather than coat it. Sheet replacement is quoted separately and itemised so you can see exactly what the steel costs versus the coating.
Will the new coating match Colorbond colours?
The topcoat range is matched to standard Colorbond colours — Monument, Woodland Grey, Manor Red, Basalt and the rest — so gutters, fascias and sheds still tie in. Custom tints are available if you want something off the standard chart.